The gyratory crusher integrates mechanical, hydraulic, electrical, automation, intelligent control and other technologies. It is a new type of coarse crushing equipment with large capacity and intelligence. Compared with the traditional gyratory crusher. The gyratory crusher has higher crushing efficiency, lower use cost and convenient maintenance and adjustment.
The gyratory crusher is mainly composed of a crossbeam, an upper, middle and lower frame, a moving cone, an eccentric sleeve, a transmission part and a hydraulic cylinder. The horizontal shaft is driven by the motor to rotate, and the horizontal shaft drives the eccentric sleeve to rotate through the gear, and then the eccentric sleeve drives the moving cone to swing in a circle, thereby achieving continuous extrusion and crushing of stones. By adjusting the hydraulic cylinder at the bottom of the moving cone, the moving cone can be moved up and down, so as to conveniently adjust the size of the discharge port and the size of the product particle size. At the same time, the hydraulic cylinder also provides an iron protection function. When an object that cannot be crushed (such as an iron block) enters the crushing chamber, the hydraulic cylinder can automatically make the moving cone fall, thereby releasing the iron block, continuing to crush and protect the crusher.
Tenfaye can provide large steel castings for gyratory crushers, such as shell, upper and frame, crossbeam, etc. If you want to learn more, welcome to send your drawings to mischa.wang@tenfaye.com