Slag pots are used to hold hot steel slag. The temperature of steel slag in the converter smelting process is higher than that of molten steel, and there is a risk that steel slag will melt through the slag pot, so the quality requirements for slag pots are very strict.
Precautions when using slag pots:
1. Before using a new slag pot, it is necessary to confirm the safety of the slag pot and confirm that there are no safety hazards in the ear shaft, tank body and other parts before it can be used.
2. There must be no water or moisture in the slag pot, and it must be treated and dried before it can be used;
3. If the slag pot is found to have water accumulation, no slag padding or ear shaft defects, it should be repaired immediately;
4. When pouring slag, it should be poured slowly and not too hard or too fast into the slag pot.
When the slag pot has cracks, deformation, ear shaft root cracks and steel sticking, it means that the slag pot is scrapped. At this time, scrap steel should be cut and recycled into the furnace as scrap steel. After the slag pot is scrapped, the preparation operation area should promptly apply to the production department for casting a new slag pot to replenish it to ensure the normal operation and use of the slag pot.
Tenfaye has nearly 20 years of experience in slag pot production, with complete equipment and mature slag pot production technology. Welcome to consult. Emaill:mischa.wang@tenfaye.com