Rolling mill housing, also known as frame or frame body, is an important part of hot rolling, cold rolling, continuous rolling and other rolling mills. Due to the harsh working environment of the rolling mill, during the working process, the rollers pass through the bearing seat and cause a large impact on the rolling mill housing. Therefore, the quality requirements are strict and there must be no inclusions, shrinkage holes, looseness, cracks and other casting defects. Rolling mill housing not only requires accurate dimensions, but also requires high mechanical properties of steel castings.

Features of Tenfaye Rolling Mill Housing
1.Tenfaye uses standard wooden models, and a special coating layer is painted on the surface of the core to prevent cracking and ensure that the surface of the casting is smooth and smooth.
2. Use high-quality scrap steel raw materials and auxiliary materials, and strictly test the ingredients before production.
3. During smelting, samples are taken three times before the furnace, as cast, and after the furnace, and a spectrometer imported from Germany is used for testing to ensure that the ingredients are qualified.
Tenfaye Steel Casting has more than 17 years of technical experience in processing rolling mill housing. We have strong steel casting production capabilities and can produce and process rolling mill housing and other components in large quantities. The casting cycle is short and the output is large. Email:mischa.wang@tenfaye.com