The large gear ring and the small gear together form the rotation system of the rotary kiln. However, during the operation of the rotary kiln, the large gear ring is prone to abnormal vibration. So what are the reasons for the abnormal vibration of the large ring gear of the rotary kiln?
1. The rotary kiln body parts are worn and the whole body sinks. The rotary kiln is a large-load continuous operation equipment. After long-term operation, the rolling rings, supporting wheels, backing plates and other components are greatly worn, and the uneven foundation settlement causes the overall decline of the kiln body, thus reducing the tooth gap and causing vibration.
2. Caused by wear of connecting parts. After the connecting parts are worn, the ring gear components will loosen and the local ring gear will sink, which will also cause the tooth gap to become smaller and cause vibration.
3. The cylinder at or around the ring gear is bent, causing the large gear ring to deflect excessively in the radial direction and cause vibration.
There are many reasons for abnormal vibration of the ring gear, and judgment and handling should be made based on the actual situation.
The characteristics of the large gear ring produced by Tenfaye are: delivering smooth, reliable operations, long service life, customizable, etc.
Welcome to consult for free. Email:mischa.wang@tenfaye.com