1.Comparison of Service Life:
The steel casting slag pot has a longer service life than the iron casting slag pot.
Reason: The cast steel slag pot has higher strength and toughness, allowing it to withstand greater mechanical impacts and thermal stresses, and it has better corrosion resistance. The service life of the steel casting slag pot can exceed 5,000 cycles.
2.Comparison of Production Costs:
The production cost of the steel casting slag pot is 10% lower than that of the iron casting slag pot.

The iron casting slag pot is a brittle material, while the steel casting slag pot is a ductile material; therefore, the steel casting slag pot is relatively more prone to deformation. To solve this problem, Tenfaye uses a natural gas heat treatment kiln to make the temperature uniform, ensuring refined grains, uniform organization and elimination of casting stress in the slag pot. So the steel casting slag pot resists deformation, further extending its service life.

The Reason to Recommend Steel Casting Slag Pots
Based on the above comparisons, in terms of economic benefits and long-term perspective, the steel casting slag pot outperforms the iron casting slag pot in both service life and production costs, and it can maintain structural integrity in high-temperature and high-pressure environments. 

Tenfaye's Steel Casting Slag Pot Production Advantages
1. Rich production experience: With more than 17 year experience with 1,000 pieces of slag pot production in various specifications and material requirements, Tenfaye directly serving more than 20 large steel companies around the world.
2. Long service life: Compared with the slag pot produced by molten steel from converter furnace, the service life is 2-3 times longer, and can reach more than 5,000 times.
3. Strong technical strength: Tenfaye adopt the domestic advanced "Huazhu CAE" casting simulation software to simulate the solidification process of the slag pot. Then adjust it based on the simulation results, to ensure the optimal process parameters.