The kiln support roller is used on the rotary kiln to bear the weight of the entire rotary kiln. Over time, it is easy to have insufficient support force, so the kiln support roller needs to be regularly maintained or replaced. The manufacturer needs to first check whether the support roller is damaged, regularly replace the lubricating oil, clean the support roller, measure the diameter and wear of the support roller and the shaft head, etc. If the support roller is seriously worn, it needs to be replaced in time.
When replacing the support roller, you need to pay attention to the following points:
1. You need to choose the right manufacturer of the kiln support roller and the support roller that meets the quality standards. Make sure that the kiln support roller matches the rotary kiln equipment.
2. Before replacing the support roller, you need to wait for the rotary kiln to cool down and clean the site to keep it clean and tidy.
3. The technician finds the center line of the kiln and the support roller and marks it. During the replacement, the new support roller is placed steadily and aligned to ensure that its stress state remains basically unchanged, and then the oil stains are cleaned.
4. After the new support roller is installed and checked for problems, the wheel tyre is placed on the support roller, lubricated and heat-insulated, etc., and then inspected and accepted. At this time, the replacement of the kiln support roller is completed.
Tenfaye professionally produces rotary kiln steel casting parts, such as, large girth gear, kiln tyre, thrust roller, etc. Sincerely welcome your inquiry. Email:mischa.wang@tenfaye.com